Description
U.S. 75mm M48 Round with M51A4 Point-Detonating Fuze, M20 Booster and M5A1 Case
This 75mm M48 round features a Frankford Arsenal projectile dated 1941, an M51A4 fuze dated May 1945, an M20 booster M5A1 case and primer all carry their own maker, date, and lot markings, giving collectors several examples of wartime ammunition components on one display round.
Identification & Features
The markings below identify the individual components. Their dates refer to separate production histories.
- Projectile:
- Stamped “LOT 4471-124 FA 75MM M48, 1941.” M48 is the projectile model, 75MM identifies the caliber, FA identifies Frankford Arsenal in Philadelphia, Pennsylvania, and 1941 is the projectile's manufacture year.
- Fuze designation:
- “FUZE P.D. M51A4” identifies the M51A4 point-detonating fuze. “SQ” means superquick impact action; “DELAY” identifies its delayed impact action.
- Fuze production marking:
- “5-45-AOP-6-163” records May 1945 and Arkansas Ordnance Plant at Jacksonville, Arkansas. .
- Booster:
- Stamped “LOT FA-E-4788 BOOSTER M20 INERT.” M20 is the booster model, FA identifies Frankford Arsenal
- Case:
- The supplied headstamp reads “75NN M5A1 LOT 5-1300-3 S.M.C. 1941.” maker initials S.M.C., and a 1941 manufacture date.
- Crossed cannons:
The case bears the U.S. Army Ordnance Department emblem.
- Primer:
- Stamped “M1B1A1 PA10-2205-5 1942.” M1B1A1 is the percussion-primer model; PA identifies Picatinny Arsenal in New Jersey. and 1942 is its production year.
Arsenals and Wartime Production
Frankford Arsenal began operating in 1816 and became a major Army center for ammunition manufacture and development. Picatinny began as a powder depot in 1880, received the arsenal name in 1907, and expanded into artillery ammunition and fuze development. Arkansas Ordnance Plant was a government-owned facility operated by Ford, Bacon & Davis during World War II. Its production included fuzes, boosters, primers, and other ammunition components shipped to other plants for final assembly. The AOP marking therefore identifies the fuze's production source.
M48 Development and Fuze Configuration
The M48 high-explosive projectile developed from the experimental T3 design tested during the early 1930s. It was already listed as authorized 75mm pack-howitzer ammunition in 1941 and served as a general-purpose shell for blast and fragmentation against personnel and field positions. Early M48 ammunition used M20 or M20A1 boosters with M48-series fuzes. The later M51A4 belonged to the Army's superquick/delay fuze family and normally incorporated an M21A4 booster. This example is described with its supplied M51A4-marked fuze and M20 booster.
Case Identification and Documented Applications
Army manuals identify the M5A1 as the brass case used with M48 ammunition for the 75mm M1 and M1A1 pack howitzers and the M2 and M3 vehicle-mounted howitzers. The M5A1 evolved from the M5 case, with added length to accommodate the revised projectile rotating band. M48 gun ammunition used the different M18 case. These distinctions matter because the M48 projectile designation alone does not identify the complete round's weapon application.
Pack Howitzer and Vehicle History
The 75mm pack howitzer was developed to bring artillery into mountain terrain beyond the reach of ordinary wheeled guns. Following the earlier 2.95-inch Vickers-Maxim mountain gun and experimental M1920, the M1 was standardized in 1927 and later improved as the M1A1. Pack howitzers equipped Army airborne artillery and Marine landing forces during World War II, with extensive use in Pacific campaigns. The related M2 and M3 howitzers armed the M8 Howitzer Motor Carriage, which used a modified M5 light-tank chassis and an open-topped turret to provide mobile assault and support fire.
Condition
Offered as an inert round for collection and display, with the component markings described above. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
This example suits collections focused on wartime ammunition production and the identification of individual ordnance components.
- U.S. WWII 75mm ammunition collections.
- Frankford Arsenal and Picatinny Arsenal displays.
- Arkansas Ordnance Plant industrial-history exhibits.
- Study of M48 projectiles, M51-series fuzes, and component lot markings.
Approx length 23.5", Approx width 3.5", Approx height 3.5", Approx weight 15.3lbs.
Please visit our page about order lead times here: Order Lead Times.