Description
105mm M67 HEAT Round with T1 Case for T4 Howitzer
This 105mm M67 HEAT round features an inert-filled projectile paired with a T1 cartridge case identified for the T4 howitzer. The case includes a flash tube that unscrews and a wooden weight-equivalent insert, giving collectors several distinct components to examine and display. This extremely rare round is the earliest example of the M67 that we've ever encountered, as well as having the ultra-scarce T1 cartridge case. This is the only one of these we've ever had, so you'll be receiving the exact round shown in the photos.
M67 Antitank Projectile History
The M67 high-explosive antitank projectile was developed during World War II to give 105mm howitzers an armor-defeating round. Its service design used a shaped charge, allowing a relatively low-velocity howitzer to engage armored targets. It followed the same basic design as the 75mm M66 HEAT projectile. Wartime M67 service ammunition used an M14 cartridge case and an M62-series base-detonating fuze. The M67 design also continued in target-practice ammunition with an inert projectile filling. This is the earliest M67 projectile that we've ever come across. The projectile still retains its original yellow paint under the black paint, which signified a high explosive filling. This was standard until the end of 1942, at which time the Army started using olive drab green paint to signify a high explosive loading. The projectile is from "LOT 3" and is also stamped "1942", which was also the year the M67 was classified by the Army. On top of the yellow paint, the projectile still retains its later war black paint with white markings, which signified that it was inert loaded.
T1 Case and Howitzer Development
The case offered here retains the supplied T1 identification for the T4 howitzer. The broader American 105mm howitzer program developed between the world wars, with the M1 howitzer and carriage standardized in January 1928. Changes to the chamber and ammunition requirements led to the M2 howitzer, standardized in April 1934. Further work adapted the weapon to motor transport and a new carriage, while breech changes produced the M2A1 in March 1940. This history provides the setting for the development of early 105mm cartridge cases and the later wartime ammunition family.
Howitzer Applications and Service
The M67 projectile served the M2 and M2A1 field howitzer family and the M4 tank howitzer fitted to 105mm-armed M4 and M4A3 Sherman tanks. A separate round configuration served the shorter M3 howitzer developed for airborne forces. The M2A1 became a standard U.S. light field artillery weapon during World War II, supporting infantry formations, and the weapon family continued after the war under M101-series designations. These applications describe the M67 ammunition design’s service history.
Condition
The projectile contains an inert filling and has no base fuze or tracer installed. The T1 case is supplied with its removable flash tube and wooden weight-equivalent insert. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
This example suits collections focused on early cartridge cases and the development of U.S. howitzer ammunition.
- 105mm howitzer ammunition and component collections.
- Study of T1 cases associated with the T4 howitzer.
- Museum displays comparing HEAT projectiles and inert ammunition components.
Approx length 31.5", Approx width 4.75", Approx height 4.75", Approx weight 36lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.