Description
Add a strong piece of U.S. Army 155mm artillery support history to your collection with this Technical Manual TM 9-1025-212-23&P. This manual covers the Extractor Assembly used with the M198, M109A1, M109A2, and M109A3 howitzers.
This manual is dated October 1981 and is listed with NSN 1025-01-082-3586.
Historical Significance
The M198 was a 155mm towed howitzer. The M109A1, M109A2, and M109A3 were 155mm self-propelled howitzers. These guns were major U.S. artillery systems during the Cold War. They gave Army units strong field fire support.
This manual covers a special tool used when a projectile needed to be removed from the howitzer after being rammed.
What This Manual Covers
This is a 23&P manual. It includes service information, repair parts, and special tools for the extractor assembly.
The extractor assembly was the only authorized piece of equipment used to remove a rammed M712 projectile or M823 training projectile from the M198, M109A1, M109A2, and M109A3 howitzers.
The assembly is extended and placed into the breech. It engages the base of the projectile. The ratchet is then used to pull the projectile free from the forcing cone so it can be removed.
Key Features
- Technical Manual TM 9-1025-212-23&P
- Covers the 155mm Howitzer Extractor Assembly
- Dated October 1981
- Listed with NSN 1025-01-082-3586
- Used with the M198 Howitzer
- Used with the M109A1, M109A2, and M109A3 Howitzers
- Covers removal support for M712 and M823 projectiles
- Includes repair parts and special tools information
- Strong fit for 155mm artillery and Army manual collectors
Why This Manual Matters
This manual shows the support side of 155mm artillery service. It is not about firing the weapon. It covers the tool used to safely remove certain rammed projectiles from the gun system.
It pairs well with M198 Howitzer displays, M109 artillery collections, 155mm projectile reference sets, Cold War field gear, and U.S. Army technical manual libraries.
About This Manual
This listing is for Technical Manual TM 9-1025-212-23&P, covering the Extractor Assembly for the M198, M109A1, M109A2, and M109A3 Howitzers, dated October 1981.
This listing is for the manual only unless stated otherwise. No extractor assembly, howitzer, projectile, ammunition, tools, case, or extra items are included unless shown or noted.
Ideal For
- M198 Howitzer collectors
- M109A1, M109A2, and M109A3 collectors
- 155mm artillery displays
- Cold War Army manual collections
- U.S. artillery tool reference sets
- Museum and archive libraries
Approx length 8", Approx width 11", Approx height .25", Approx weight 1lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item's general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times