Description
Add a specialized piece of Cold War U.S. armor documentation to your collection with this Technical Manual Change 3 for TM 9-1005-219-35, covering the .50 Cal M1 Machine Gun Mount / Commander’s Machine Gun Cupola M1. Dated August 1966, this change notice updates the original TM 9-1005-219-35, issued November 17, 1961.
This is the Change 3 update only, not the full base manual. For collectors, that makes it a useful companion piece for completing a full TM 9-1005-219-35 manual set.
Historical Significance
The M1 Commander’s Machine Gun Cupola is closely tied to the M48 Patton tank family. The original TM 9-1005-219-35 identifies the cupola as installed on M48A1, M48A2, and M48A3 90mm gun tanks, where it supported the Cal. .50 M2 heavy barrel machine gun, provided armor protection, and allowed observation through vision devices.
That gives this August 1966 Change 3 strong collector appeal. It sits in the Vietnam War-era documentation period, when the M48 series and its turret equipment were still important pieces of U.S. armored vehicle history.
What This Change Covers
As Change 3 for TM 9-1005-219-35, this publication updated the Army’s field and depot maintenance manual for the M1 Commander’s Machine Gun Cupola / .50 Cal M1 Machine Gun Mount.
This manual change is especially relevant for:
- M1 Commander’s Cupola documentation
- .50 Cal M1 Machine Gun Mount reference
- TM 9-1005-219-35 revision history
- M48A1, M48A2, and M48A3 Patton collections
- .50 caliber tank machine gun mount research
- Cold War and Vietnam War armored vehicle displays
- U.S. Army field and depot maintenance manual libraries
- collectors completing an M48 Patton technical manual set
The base manual covered removal, disassembly, inspection, repair, rebuild, and assembly of the cupola at field and depot maintenance levels.
Key Features
- Technical Manual Change 3 for TM 9-1005-219-35
- Covers the .50 Cal M1 Machine Gun Mount / Commander’s Machine Gun Cupola M1
- Dated August 1966
- Updates the original manual issued November 17, 1961
- Field and depot maintenance manual update
- Associated with M48A1, M48A2, and M48A3 Patton tanks
- Connected to the Cal. .50 M2 Heavy Barrel Machine Gun
- Strong Cold War / Vietnam War-era armor collector subject
- Excellent companion piece for a complete TM 9-1005-219-35 manual set
- Desirable for M48 Patton, tank cupola, turret, and .50 caliber mount collectors
About This Manual Change
This listing is for Technical Manual Change 3 for TM 9-1005-219-35, covering the .50 Cal M1 Machine Gun Mount / Commander’s Machine Gun Cupola M1, dated August 1966.
This listing is for the Change 3 update only unless otherwise stated. No complete base manual, tank, cupola, machine gun, mount, ammunition, tools, repair parts, storage case, or additional accessories are included unless specifically shown or noted.
Ideal For
This manual change is a strong fit for:
- M48 Patton collectors
- Cold War U.S. Army technical manual collections
- M1 commander’s cupola reference libraries
- tank turret and cupola research collections
- .50 caliber machine gun mount displays
- Vietnam War-era armor documentation collections
- museum and archival reference collections
- collectors completing a TM 9-1005-219-35 manual set
- serious armor historians and ordnance collectors
Approx length 10", Approx width 8", Approx height .2", Approx weight .2lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item's general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times