Description
U.S. 76/50mm M331A2 HVAPDS-T Round with T19E1 Case
This U.S. 76/50mm M331A2 round features a Kennametal-marked projectile and a Frankford Arsenal T19E1 case bearing a 1954 date. The case also carries the additional marking “M2 1944.” Offered inert, this early Cold War armor-piercing round represents the discarding-sabot ammunition developed for the 76mm gun family associated with the M41 Walker Bulldog light tank. An extraordinarily rare round; this is the most complete, best-marked M331 round we've ever had in 30 years! This is the only example that we have, so you will be receiving the exact round shown in the photos.
Identification & Features
The projectile is stamped “SHOT HVAPDS-T 76/50MM M331A2 LOT NO. -KNC-4- 54”. The case is stamped “76MM T19E1 LOT FA-1-15 1954”, with the separate marking “M2 1944”.
- SHOT HVAPDS-T: Hypervelocity armor-piercing discarding-sabot shot with tracer, intended for use against armor.
- 76/50MM M331A2: The caliber and model identification for this subcaliber discarding-sabot projectile.
- KNC: Kennametal, Inc., of Latrobe, Pennsylvania. KNC-4 is the recorded lot marking; the following “54” is consistent with a 1954 production date.
- FA-1-15: Frankford Arsenal, Philadelphia, Pennsylvania, with lot interfix 1 and lot sequence 15.
- 1954: The date accompanying the Frankford Arsenal T19E1 case identification.
M331A2 Design and Development
The M331 series formed part of the Army’s postwar development of armor-piercing ammunition using a discarding sabot. The service design carried a dense tungsten-carbide penetrator in a supporting sabot, which separated after the projectile left the gun. A tracer helped crews observe its flight. This allowed the smaller penetrator to continue toward the target without carrying the full-diameter sabot. Army development records document work on the M331A2 during 1954 and 1955, placing the model in the early development period of the Walker Bulldog’s ammunition.
T19E1 Case History
T19E1 was the developmental designation of the brass case later standardized as M88. Army ammunition charts identify the brass M88 as “T19E1” and distinguish it from the steel M88B1, formerly T19E1B1. The additional “M2 1944” stamp on this example is consistent with an earlier case (Mk2 M2) reused & reworked for the T19E1 configuration. Other surviving T19E1 cases have been documented with retained markings from 1944-dated 3-inch Mk. II M2 cases. Supplied markings support recording 1954 as the date of the Frankford Arsenal T19E1 identification rather than automatically dating the original brass to that year.
Gun Applications and Walker Bulldog History
Army ammunition references list the M331A2 for the 76mm M32 and M48 guns. The M32 armed the M41 Walker Bulldog, developed through the T41 light-tank program to replace the wartime M24 Chaffee. Cadillac began production at its Cleveland Tank Plant in 1951. The M41 combined a more powerful 76mm gun with the mobility needed for cavalry and reconnaissance duties. It served with U.S. forces and numerous allied armies, including West Germany. South Vietnam began receiving M41 tanks in January 1965, replacing its older M24s. The M551 Sheridan later took over the light-tank role in U.S. service.
Condition
Offered as an inert M331A2 round with the marked T19E1 case described above. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
The maker codes, dated case markings, and developmental case designation give this round particular interest for collectors studying early Cold War tank ammunition.
- M41 Walker Bulldog displays and restoration exhibits.
- U.S. discarding-sabot ammunition collections.
- Kennametal and Frankford Arsenal production studies.
- Collections documenting developmental and reused cartridge cases.
Approx length 4.25", Approx width 4.25", Approx height 32", Approx weight 10.8lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.