Description
U.S. 75mm M309A1 HE Round with M48-Series Fuze and M31A1 Case for M20 Recoilless Rifle
Item Overview
This U.S. 75mm M309A1 high-explosive round retains a 1944 M48 shell-body stamp alongside later 1949 M309A1 markings. The projectile and M31A1 case both carry lot FA-1-6, and the round is fitted with an M48-series point-detonating superquick/delay fuze. The round is offered inert for collection and display. The projectile started out its life as the M48 high-explosive projectile that was used in the 75mm Sherman Tank gun, as well as the M1 series of Pack Howitzers. The M48's copper drive band was then pre-rifled for use in the much lower pressure 75mm M20 recoilless rifle. After the M48 projectile was modified at the arsenal, the correct M309A1 paint markings were applied. The projectile and cartridge case still retain the original finish, paint, and markings! Beautiful condition!
Identification & Features
The projectile is stamped “1949 75MM M309A1 LOT FA-1-6,” with “PoA 127 1944 75MM M48” and an Ordnance Department flaming-bomb emblem above the driving band. Yellow stenciling near the upper bourrelet reads “75R TNT SHELL M309A1 +++.” The case head is stamped “75MM M31A1 LOT FA-1-6,” and the fuze is marked “SQ” and “DELAY.”
- 75MM M309A1: The caliber and later high-explosive projectile designation. A1 identifies the first modification of the M309 model.
- 75MM M48: The original shell-body designation. Here, M48 identifies the earlier projectile model, separately from the M48-series nose fuze.
- 127: Read as the original shell-body production lot associated with the PoA marking.
- FA-1-6: A Frankford Arsenal lot identifier. In the older lot-numbering system, FA identifies the arsenal, 1 is the production-group interfix, and 6 is the lot sequence.
- 75R: 75mm rifle ammunition, in this application for a recoilless rifle.
- TNT SHELL M309A1: Identifies the original TNT-filled high-explosive shell and its model. TNT is the abbreviation for trinitrotoluene.
- +++: Weight zone 3, assigned according to the loaded projectile's weight. The contemporary 75mm recoilless-rifle manual identifies two crosses as the normal weight zone.
- M31A1: The perforated steel cartridge-case model used with the M309A1 round. A1 denotes the first modification of the M31 case.
- SQ / DELAY: Fuze action markings for superquick impact action and delayed action. These words identify the available functions without establishing the exact fuze modification.
- Flaming bomb: The U.S. Army Ordnance Department emblem accompanying the original projectile markings.
Manufacturers, Dates, and Reworking
PoA is Peerless of America. The firm began in Chicago in 1912 as Peerless Ice Machine Company and adopted the Peerless of America name in 1937. The 1944 date belongs to the original M48 body, while the later 1949 M309A1 marking indicates conversion or reworking under a Frankford Arsenal lot. Frankford Arsenal in Philadelphia was a major Army center for ammunition development and manufacture.
M48 to M309A1 Development
The M309 began as the experimental T38 and used a modified M48 high-explosive shell design. The M309A1 followed with a revised crimping groove and the M31A1 case, whose service configuration used a plastic liner in place of the earlier M31 case's paper liner. A pre-engraved rotating band and perforated case distinguished this recoilless ammunition from conventional 75mm gun rounds. The M309A1 served the M20 recoilless rifle as high-explosive ammunition for blast and fragmentation against personnel and field positions.
M20 Recoilless Rifle History and Use
The M20 grew from Frankford Arsenal's wartime recoilless-weapon development by William J. Kroeger and C. Walton Musser. Developed alongside the smaller 57mm weapon, the 75mm rifle gave infantry a heavier portable support weapon without a conventional artillery recoil mechanism. Production began in 1945, with Miller Printing Machinery Company of Pittsburgh receiving the wartime 75mm production order. The M20 remained in service during the Korean War, when Marines used it against fortified positions and enemy armor.
Condition
The round includes the marked M309A1 projectile, M48-series fuze, and M31A1 case. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
The dated markings suit collections that follow ammunition manufacture and postwar reworking.
- 75mm M20 recoilless-rifle displays.
- Collections covering WWII and early Cold War ammunition development.
- Frankford Arsenal production and renovation studies.
- Museum exhibits explaining shell markings, lots, and weight zones.
Approx length 29", Approx width 4", Approx height 4", Approx weight 17.2lbs.
Please visit our page about order lead times here: Order Lead Times.