30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon

SKU:
30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
30mm Weapon Systems:
30mm Experimental Philco-Ford (30x167mm)
Complete Rounds:
Dummy
  • 30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
  • 30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
  • 30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
  • 30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
  • 30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
  • 30mm Non-Durable Dummy Round for the Experimental Philco-Ford GAU-8/A Rotary Cannon
$245.00

Sold Out

Frequently bought together:

Description

U.S. Philco-Ford/Honeywell 30mm Non-Durable Dummy Cartridge

Product Overview

This U.S. experimental 30×167mm Philco-Ford/Honeywell non-durable dummy cartridge represents ammunition developed during the early-1970s GAU-8/A gun competition. It belongs to the effort to equip the future A-10 Thunderbolt II with a powerful aircraft cannon. Its historical importance comes from its connection to Philco-Ford's competing gun system and Honeywell's ammunition development.

Identification and Features

Dale M. Davis's 1984 Air Force ammunition-development history, AFATL-TR-84-03, documents the Ford non-durable dummy on page 80 and in Figure 23(D). “Non-durable” identifies its construction category.

  • Cartridge family: Experimental 30×167mm ammunition for the Philco-Ford gun program.
  • Assembly: A crimped connection between the case and projectile.
  • Primer-pocket feature: A plastic insert in place of a firing primer.
  • Internal arrangement: Ballast used to represent loaded ammunition's weight and balance.

Manufacturer and Case Markings

The cartridge case carries black stencil markings reading “30mm” and “RNO-000.” The RNO manufacturer code identifies AMRON Corporation of Waukesha, Wisconsin. The Department of Defense handbook MIL-HDBK-1461A lists this company and location under that symbol, establishing the manufacturer associated with the case marking.

Function and Contents

Mechanical dummy cartridges reproduced the size, weight, and balance of loaded ammunition for non-firing tests. They allowed engineers to check cartridge fit, handling, and movement through the gun and ammunition feed system. These checks helped reveal feeding problems without firing ammunition. The offered item is the assembled dummy cartridge.

Product History

In June 1971, the Air Force contracted General Electric and Philco-Ford to develop competing 30mm gun systems. Honeywell developed ammunition for Ford's entry, while Aerojet supported GE. Each effort required ammunition for firing trials and test articles for checking mechanical operation. The Ford dummy examples illustrated in the Air Force's later development history carry 1972 dates, placing the documented design within this intensive testing period.

Documented End-Item Applications

The direct application was the experimental Philco-Ford GAU-8/A candidate and its ammunition-handling equipment. The intended aircraft program was A-X, which produced the Fairchild Republic A-10 Thunderbolt II. This cartridge's aircraft connection is through the development competition. It represents the ammunition system proposed by Ford before the Air Force selected the production armament.

Non-Durable and Durable Dummy Designs

The program used two different dummy constructions. The non-durable version relied on its crimped assembly to hold the components together. The reinforced durable version added a screw through the case head that secured the projectile against loosening during repeated cycling. These names distinguished the designs and their ability to withstand repeated mechanical handling.

Equipment History

Philco-Ford's candidate was a six-barrel Gatling-type cannon with a linkless ammunition feed system. Its complete installation included ammunition storage, drive equipment, and controls. General Electric's competing gun used seven barrels. Engineers had to evaluate each system as a complete assembly because reliable ammunition movement was as important as the cannon's firing performance.

Weapon System Background

The A-X program sought an aircraft dedicated to close air support of ground forces. Fairchild Republic's YA-10A first flew on May 10, 1972, and the Air Force selected the aircraft on January 18, 1973. Gun development continued alongside the aircraft work. The cannon, ammunition supply, and feed equipment all had to operate reliably within an aircraft built around its ground-attack mission.

History of Use

The competing gun systems underwent evaluation at Eglin Air Force Base from January 3 through April 6, 1973. Air Force engineers and technicians operated and maintained the equipment, with contractor personnel serving in advisory roles. The trials examined reliability and overall performance. Mechanical dummy cartridges supported the broader development work by allowing ammunition-handling checks without firing, while separate firing trials tested the guns under operating conditions.

Program Outcome

General Electric won the competition and received the full-scale development contract on June 21, 1973. Its GAU-8/A Avenger became the production A-10's cannon. Honeywell continued ammunition development as a second subcontractor under the selected GE program alongside Aerojet. This example preserves the earlier Ford phase of that development history.

Condition

All ordnance is inert. Please check the pictures for the general condition of the item.

Ideal For

This cartridge offers a focused addition to a collection exploring experimental ammunition and the engineering work behind American aircraft armament. Its published identification makes it useful for explaining how mechanical test articles supported weapon development.

  • Philco-Ford, Honeywell, and AMRON ammunition collections.
  • A-X and A-10 armament-history exhibits.
  • Cold War experimental-ammunition displays.
  • Comparisons of durable and non-durable dummy construction.

Approx length 11", Approx width 1.75", Approx height 1.75", Approx weight 1.4lbs.

Please visit our page about order lead times here: Order Lead Times.

View AllClose