Description
U.S. 3-Inch M15B1 Drill Round with Removable Base and M80 Dummy Fuze
This U.S. 3-inch M15B1-family drill round features a one-piece hollow body, a removable base marked 1943, and a removable M80 dummy fuze. Removable weight increments allow adjustment of the round's overall weight. Offered inert for collection and display, it represents the reusable training ammunition associated with American 3-inch antiaircraft and tank-destroyer guns.
Identification & Features
The base is marked 75MM DRILL CARTRIDGE M15 & M15B1 FOR 3 IN GUN M1918, M3 & M7 WOF 1943-ALS. The fuze is stamped FUZE DUMMY M80 COJ. The inscription is reproduced as supplied, including the “75MM” wording; the named guns and M15/M15B1 drill-cartridge family are 3-inch equipment.
- M15 & M15B1: Related drill-cartridge models intended for repeated crew training.
- 1943: The production year marked on the removable base.
- One-piece hollow body: Represents both the projectile and cartridge-case portions of a service round.
- Removable base: Contains removable weight increments for adjusting overall weight.
- M80 dummy fuze: Removable and fitted with a spring-loaded center bolt.
Drill-Round Design and Development
Wartime Army manuals describe the M15 and M15B1 as functionally similar drill cartridges for instruction in gun loading and fuze setting. The M15 used bronze and brass parts, while the M15B1 used malleable iron and steel. Their design included a sliding, spring-supported base to assist extraction and compensate for wear during repeated training. The shared model marking on the base identifies this drill-round family without establishing the body's material variant. Wartime illustrations show an M59 dummy fuze; this example is fitted with an M80, the dummy counterpart of the M43A5 mechanical-time fuze.
Gun Applications and Service History
The base names the 3-inch M1918, M3, and M7 guns. The M1918 originated as a World War I-era mobile antiaircraft weapon. Continued development between the wars produced the M3 antiaircraft gun, standardized in 1928. The M7 brought 3-inch firepower to armored vehicles and armed the M10 and M10A1 tank destroyers during World War II. These vehicles used chassis derived from the M4 medium tank to provide mobile antitank firepower. Drill rounds supported crew instruction by reproducing the handling and loading of service ammunition without firing it.
Condition
The round has a hollow body, removable base, removable weight increments, and a removable M80 dummy fuze with a spring-loaded center bolt. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
This drill round suits collections that explain how American artillery and tank-destroyer crews trained with their equipment.
- U.S. 3-inch artillery and M10 tank-destroyer displays.
- Study of M15/M15B1 drill-round construction and M80 dummy fuzes.
- Museum exhibits on World War II gun-crew training.
Approx length 34", Approx width 4.25", Approx height 4.25", Approx weight 29lbs.
Please visit our page about order lead times here: Order Lead Times.