Description
German 28/20mm Pzgr. 41 Armor-Piercing Round
This German Pzgr. 41 armor-piercing round features a 1943-dated brass case marked avu and the distinctive projectile used by the 2.8 cm schwere Panzerbüchse 41 (s.Pz.B. 41). Offered as an inert display round, it represents Germany’s wartime squeeze-bore ammunition development. This round retains German component markings alongside English “EMPTY” stamps on both the projectile and case.
Identification and Features
The 28/20×187mm round has a rimmed, bottleneck brass case and a pointed projectile with a perforated forward flange. Known as the Pzgr. 41 armor-piercing design and has the following markings:
- Case head: “avu,” “43,” “3b,” and “2.8cm Patrh.Pz.B.”
- Case acceptance: an eagle/Waffenamt inspection stamp.
- Case wall: “EMPTY” and the separate number sequence “4 6 54.”
- Projectile: “EMPTY,” with additional worn stamps on the exposed metal below the nose.
Case and Percussion Primer
The case’s “43” marking dates its manufacture to 1943. Its screw-in primer carries “buu,” “42,” and “168,” with a faint C/13 n.A. St. designation. The primer date is 1942. The C/13 n.A. St. was the steel-bodied version of the C/13 n.A. percussion primer; its service role was to ignite the cartridge’s propelling charge.
Pzgr. 41 Projectile Design
Pzgr. 41 projectiles used a tungsten-carbide core, two compressible skirts, and a magnesium-alloy ballistic cap. As the projectile traveled through the weapon’s tapered barrel, the skirts compressed to follow the bore’s reduction from 28mm to 20mm. This system gave a light projectile very high velocity for armor penetration. The magnesium-alloy cap produced a flash on impact to help observers locate the strike. Period U.S. references list an armor-piercing projectile weight of approximately 130 grams, or 4.6 ounces, and a muzzle velocity of approximately 4,600 feet per second, or 1,400 meters per second.
Development of the s.Pz.B. 41
Approved for service in November 1940 and introduced in 1941, the s.Pz.B. 41 applied the Gerlich tapered-bore principle to a compact infantry antitank weapon. Its German name translates as “heavy antitank rifle,” and its equipment included a shielded carriage, recoil system, muzzle brake, and horizontal sliding breech. The design sought useful armor penetration from a weapon light enough to move with infantry. Germany also fielded the larger 4.2 cm Pak 41 and 7.5 cm Pak 41 using the same broad principle. Increasing tank armor and shortages of tungsten for ammunition limited the usefulness of these weapons as the war continued.
Weapon Applications and Service
The Pzgr. 41 served as armor-piercing ammunition for the s.Pz.B. 41 on its standard carriage and lightweight airborne mounting. Period U.S. references give weights of approximately 501 pounds for the standard weapon and 260 pounds for the airborne version. German armored and motorized infantry used it for antitank defense at rifle-company level, while mountain troops benefited from a weapon that could be separated into carrying loads. Airborne units also received the lighter version. Vehicle applications included the Sd.Kfz. 221 armored car fitted with the 2.8 cm weapon.
Condition
The photographed brass case shows tarnish, spotting, scratches, and handling marks, with a visible hole through the case wall. The projectile shows surface wear and pitting around the dark nose, along with worn markings on the exposed metal flange. The case and projectile are stamped “EMPTY.” All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
A useful display and reference piece for collections focused on German antitank ammunition and the development of squeeze-bore weapons.
- World War II German ammunition collections.
- s.Pz.B. 41 and Sd.Kfz. 221 restoration displays.
- Museum exhibits and research on Gerlich tapered-bore weapons.
Approx length 8.5", Approx width 2", Approx height 2", Approx weight 1.0lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.