20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB

SKU:
20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
Countries:
Japan
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
  • 20mm Japanese WWII Type 99 Mark 2 Aircraft Cannon Round 20×101RB
$425.00

Sold Out

Frequently bought together:

Description

Japanese 20mm Type 99 Mark 2 Aircraft Cannon Round

This Japanese 20×101RB Type 99 Mark 2 round combines a brass cartridge case with a steel projectile, copper driving band, and removable brass nose-fuze housing. Associated with the Imperial Japanese Navy’s aircraft armament during World War II, it offers collectors an example of the ammunition used by the more powerful member of the Type 99 cannon family.

Projectile and Nose Fuze

The nose-fuzed explosive projectile has a hollow steel body, a closed base, and a single copper driving band near its rear. A groove behind the band provided the attachment point for the cartridge case. The brass nose-fuze housing screws into the projectile and retains its internal threaded recess. In service, the driving band engaged the barrel’s rifling, while the impact fuze initiated the projectile’s filling. Type 99 explosive ammunition included high-explosive and high-explosive incendiary loads intended to damage aircraft structures through blast, fragmentation, and, in the incendiary versions, fire. Several fuze designs and projectile modifications served this ammunition family. 

Brass Cartridge Case

The brass case is the 101mm-long, rebated-rim case used for Type 99 Mark 2 ammunition. Its base rim is smaller in diameter than the case body, a characteristic of this Oerlikon-derived cartridge. The case retains its central primer, secured by three staking marks. Its short neck held the projectile immediately behind the driving band. The Mark 1 and Mark 2 ammunition families shared projectile and fuze designs, but used different cartridge cases. Their complete rounds were not interchangeable. The longer Mark 2 case formed part of the Navy’s move toward a higher-velocity aircraft cannon while retaining much of the established projectile family.

Oerlikon Origins and Mark 2 Development

The 20×101RB cartridge originated with the Swiss Oerlikon FFL aircraft cannon before World War II. Japan began ordering Oerlikon aircraft cannon in 1935 and subsequently obtained manufacturing rights, with domestic production established at Dai Nippon Heiki. The Japanese Type 99 Mark 2 followed the FFL design, while the shorter Mark 1 belonged to the lighter Oerlikon FF family. Both retained Oerlikon’s blowback operating principle. The Mark 2 used a longer chamber and barrel, together with greater propellant capacity, to increase muzzle velocity. Wartime U.S. ordnance data recorded approximately 2,500–2,700 feet per second for Mark 2 service ammunition, depending on the projectile loading. This higher velocity improved the weapon’s ballistic performance over the Mark 1. Japan used both Swiss-made and domestically produced ammunition in this caliber during the war.

Aircraft Applications and Feed Development

The Type 99 Mark 2 armed later Mitsubishi A6M Zero fighters and other Japanese naval aircraft. The Kawanishi N1K2-Ja Shiden Kai, known to the Allies as “George,” carried four Type 99-2 20mm cannon and served in the defense of Japan during the closing months of the war. Feed arrangements also developed as aircraft installations changed. The Mark 2 Model III used drum feed, with a 100-round drum documented in wartime specifications, while the Model IV used belt feed. These developments supported the Navy’s growing demand for greater cannon ammunition capacity in fighter aircraft. The cartridge remained associated with Japanese naval aviation through the end of World War II.

Condition

The brass case shows tarnish, scratches, and scattered surface marks. The projectile has a bare metal exterior with surface spotting and wear, and its copper driving band remains present. The removable brass nose-fuze housing is empty of its internal mechanism. All ordnance is inert. Please check the pictures for the general condition of the item.

Ideal For

This round provides a useful reference for studying Japanese naval aircraft ammunition and the development of Oerlikon-derived cannon.

  • World War II Japanese ammunition collections.
  • Type 99 cannon and naval aviation displays.
  • Museum exhibits covering Zero and Shiden Kai armament.
  • Comparative study of Type 99 Mark 1 and Mark 2 ammunition.

Approx length 7", Approx width 0.75", Approx height 0.75", Approx weight lbs.

Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.

Please visit our page about order lead times here: Order Lead Times.

View AllClose