Description
Japanese 20mm Type 2 Armor-Piercing Tracer Round for the Ho-5 Cannon
This inert Japanese 20x94mm round pairs a brass cartridge case with a pointed Type 2 armor-piercing tracer projectile for the Ho-5 aircraft cannon. Its dark steel projectile, copper-colored driving band, and visible base fitting make it a useful display and study piece for collectors of Japanese Army aviation ammunition. The round represents an ammunition type used by the Imperial Japanese Army’s late-war aircraft, including the Nakajima Ki-84 fighter.
Type 2 Armor-Piercing Tracer Projectile
The Type 2 armor-piercing tracer, or AP-T, used a solid steel forward body to penetrate its target, with a tracer cavity recessed into the base. It had no nose fuze. In service, a perforated screw-in plug closed the rear cavity, and the tracer produced a visible track to help crews observe their fire. This round has a pointed nose, a single driving band, and a stepped rear section with a threaded base fitting and central opening.
Service Variations and Tracer Markings
The Type 2 AP-T family included three versions distinguished by the hardness of their steel. U.S. ordnance records list projectile weights of 112.7 grams, 116.7 grams, and 119.5 grams for the soft, medium, and hard versions respectively. Historical finishes were black overall, black with a green band, and black with green and white bands. British examination reports also recorded a red-trace loading and another tracer composition believed to produce a greenish-white trace.
Brass Case and Primer
The brass case has a gently tapered body, a bottleneck shoulder, a rimless head, and an extractor groove. Its central primer remains seated in the base. Period Ho-5 ammunition references describe the case as approximately 94mm long and fitted with a pressed-in Type G primer.
Ho-5 Cannon Development
The Ho-5 developed from Japan’s Browning-derived 12.7mm aircraft machine gun into a 20mm cannon capable of firing armor-piercing and explosive ammunition. It retained recoil operation and used air cooling and a disintegrating metal-link ammunition belt. Fixed installations could be fired electrically by remote control. A 1945 U.S. ordnance reference lists a cyclic rate of approximately 950 rounds per minute and a muzzle velocity of 2,304 feet per second, about 702 meters per second, for its armor-piercing ammunition.
Ki-84 Fighter and Ki-67 Bomber Applications
The Ho-5 armed the Nakajima Ki-84 Hayate, known to the Allies as “Frank.” A January 1945 Allied technical report records one Ho-5 in each wing, supported by two 12.7mm machine guns above the engine. The Ki-84 combined this armament with stronger construction, armor protection, and self-sealing tanks, reflecting changes from earlier Japanese Army fighter designs. The same report identifies the Ho-5 in the Mitsubishi Ki-67 Hiryu bomber, Allied reporting name “Peggy.” These applications place the 20x94mm round within both fighter and bomber armament of the Imperial Japanese Army Air Force.
Condition
The brass case shows golden-brown patina, scattered dark staining, and surface scratches. The dark-finished projectile has visible scuffs and small bright wear marks, with minor nicks along the driving band. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
A useful example for examining Japanese aircraft ammunition and presenting the Ho-5’s place in World War II aviation history.
- Japanese Army aircraft armament collections.
- Ki-84 Hayate and Ki-67 Hiryu historical displays.
- Museum or research comparisons of AP-T and explosive cannon projectiles.
Approx length 6", Approx width 1", Approx height 1", Approx weight 0.5lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.