Description
Postwar German 20mm Plated Dummy Round with DM1A1 Case
Bright silver-colored plating distinguishes this postwar German 20×139mm dummy/display round, assembled with a pointed projectile and a DM1A1 steel cartridge case. Its reflective finish and readable headstamp make it a distinctive display piece for collectors of German cannon ammunition.
Identification & Features
The round combines a pointed projectile with a bottleneck case and rimless base. Both components have a bright plated finish, and a circumferential joint is visible near the projectile tip. The case retains a primer body in its base. DM1A1 identifies the steel case used in this assembled display round.
- Case headstamp: 20x139 DM1A1.
- Lot marking: LOS RH-027.
- Configuration: Plated dummy/display round with a pointed projectile and retained primer body.
- Finish: Reflective silver-colored plating across the projectile and case.
Cartridge Development
Hispano-Suiza of Switzerland developed the 20×139mm cartridge near the end of World War II to improve performance over its earlier 20×110mm ammunition. The company's HS 820 cannon was widely marketed during the 1950s, establishing the cartridge in postwar service. The HS 820 family later became known as the Oerlikon KAD. Germany adopted the cartridge for the Rheinmetall Rh 202, France used it in the M693, and the United States adopted it for the M139. Production in several countries supported its use in vehicle armament and antiaircraft weapons.
German Cannon Applications
Rheinmetall first manufactured the Hispano-Suiza HS 820 under license as the MK 20-1. The company later developed the separate MK 20 Rh 202, a compact, gas-operated cannon intended for ground targets and low-flying aircraft. Its relatively low recoil helped it serve on a wide range of mounts. Documented installations include the Marder infantry fighting vehicle, Luchs reconnaissance vehicle, cannon-armed Wiesel weapon carrier, FK20-2 field gun, and naval S20 mounting. The Bundeswehr also used the Rh 202 in a twin antiaircraft mounting. Historical manufacturer specifications give the cannon a cyclic rate of approximately 800–1,000 rounds per minute.
Condition
The plated finish remains bright and reflective, with fine scratches and scuffs, particularly on the base. Localized plating loss is visible near the case shoulder and around the retained primer body, exposing yellow-colored metal and darker areas beneath. The headstamp remains readable. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
This assembled display round suits collections and exhibits covering postwar German ammunition and the vehicles that carried 20mm cannon.
- German 20mm dummy and display-round collections.
- Cold War armored vehicle and cannon exhibits.
- Comparative displays of cartridge shapes, finishes, and headstamps.
Approx length 8.5", Approx width 1", Approx height 1", Approx weight 0.7lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.