Description
German 20mm Dummy / Drill / Armorer’s Proof Round with Polte H40 Markings
This German 20mm dummy / drill / armorer’s proof round features the Polte trademark, a bright plated finish, and a rounded nose ending in a small flat tip. Its machined profile represents the 20×138B round associated with Germany’s Flak 30 and Flak 38 antiaircraft guns. The 2 cm Werkzeugpatrone is an armorer’s tool round, making it a useful display piece for collections of German ammunition and military workshop equipment.
Identification & Features
The exterior reproduces the cartridge’s body, tapered shoulder, neck, and projectile profile. A raised belt and extractor groove appear near the base, which has a central circular opening. The circled monogram matches the trademark of Polte of Magdeburg, Germany.
- 20×138B cartridge profile with a rounded dummy projectile nose and small flat tip.
- Bright silver-colored plated finish with visible machining lines.
- H40 marking stamped into the base.
- Circled Polte trademark and eagle over WaA109 acceptance marking.
Armorer’s Tool-Round Function
The German term Werkzeugpatrone identifies an armorer’s tool round used to check weapon function. These inert rounds represented the shape of service ammunition for mechanical checks involving feeding, chambering, and extraction. In this context, “armorer’s proof” describes functional checking with an inert round, rather than firing a pressure-proof loading. Such equipment supported the inspection and maintenance of automatic weapons and belongs alongside drill ammunition in collections documenting military training and workshop practices.
Cartridge Development
Solothurn in Switzerland developed the 20×138B cartridge during the 1930s as an improvement over its earlier 20×105B cartridge. Also known as the 2 cm Long Solothurn, it was adopted for antiaircraft and antitank weapons in several countries. German applications included the Flak 30 and Flak 38. Purpose-built inert tool rounds reproduced the external form of this ammunition for use by armorers.
Flak 30 and Flak 38 Service History
The Rheinmetall Flak 30 became a standard German light antiaircraft gun and fed from a detachable 20-round magazine. Experience during the Spanish Civil War showed the need for a higher firing rate. Mauser developed the improved Flak 38, which retained the same ammunition and achieved a cyclic rate of about 450 rounds per minute. The Flakvierling 38 combined four Flak 38 guns on one mounting to concentrate fire against aircraft. These weapons served throughout World War II in towed, vehicle-mounted, and fixed installations, protecting troops and installations against low-flying aircraft. They could also engage ground targets.
Condition
The pictured round retains a bright finish across much of its exterior, with scratches, scuffs, scattered dark spotting, small areas of pitting, and localized finish loss. Wear is visible around the nose, belt, and base. The H40, Polte, and WaA109 markings remain visible. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
This example suits displays and research focused on German ammunition markings and the equipment used by military armorers.
- German dummy, drill, and tool-round collections.
- Flak 30, Flak 38, and Flakvierling 38 restoration displays.
- Museum exhibits covering ammunition inspection and armorer workshops.
Approx length 8", Approx width 1", Approx height 1", Approx weight 1.0lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.