Description
U.S. 105mm M735 Penetrator — Manufacturing Defective
This replica 105mm M735 penetrator is offered as a manufacturing defective with minor machining defects. It is intended for use in an inert 105mm M735 Armor-Piercing Fin-Stabilized Discarding Sabot-Tracer (APFSDS-T) replica round, giving collectors a genuine penetrator component for their display.
The Penetrator’s Role
The service M735 projectile used a tungsten-alloy core housed in a nickel-steel body, with an aluminum windshield and fin assembly. A sabot supported the smaller-diameter projectile inside the gun and separated after it left the muzzle. The fin-stabilized penetrator continued toward the target, defeating armor through the impact energy of its dense core.
M735 Development and Production
The M735 drew on earlier work with experimental fin-stabilized ammunition, including the 152mm XM578 developed for the MBT-70 tank program. It helped move U.S. 105mm tank ammunition beyond the older M392 and M728 spin-stabilized designs. In September 1976, the Army awarded contracts to establish M735 production facilities. Chamberlain Manufacturing and Flinchbaugh Products produced metal components, while Teledyne-Nashville and Kennametal produced tungsten-alloy cores. The later M774 continued the Army’s effort to improve armor penetration, using a depleted-uranium penetrator in place of the M735’s tungsten design.
M68 Tank Gun Applications and Service
The M735 belonged to the ammunition family developed for the 105mm M68 rifled tank gun. The M68 grew from American testing of the British L7 during the 1950s, as the Army sought stronger tank armament to counter Soviet armor. The gun family armed the M60, M60A1, and M60A3, as well as the original M1 and IPM1 Abrams. Army records document M735 ammunition deployed in Europe by June 1980. Later M1A1 Abrams tanks adopted the 120mm M256 smoothbore gun, while the existing 105mm tank fleet continued to use its own ammunition family.
Condition
These penetrators have minor machining defects and are sold as manufacturing defectives for replica-round and display use. All ordnance is inert. Please check the pictures for the general condition of the item.
Ideal For
This component suits collectors and museums building displays around the M735 and the development of American tank ammunition.
- M735 APFSDS-T replica-round displays.
- M60 and early M1 Abrams ammunition exhibits.
- Collections comparing tank penetrators and manufacturing examples.
Approx length 19", Approx width 3.75", Approx height 3.75", Approx weight 2.5lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item’s general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times.