***FREE SHIPPING IS INCLUDED TO THE CONTIGUOUS US***
Budget 60mm Dummy Barrel Receiver Static Display tube cup artillery cannon
See more information below...
"Budget" 60mm dummy tube and cup, approximately 80% as accurate as the other 60mm M2 dummy that we offer, which is an exact copy of the original. These dummy tubes/cups are perfect if you want something that will pass the 6-foot rule to the trained eye. Inaccuracies in these tubes/cups include: bore is undersized at 57mm, wall of tube is thicker than the genuine M2, cup has a 360° exterior weld that fixes the cup to the tube, there is no allowance for a firing pin, there is a strange notch that is milled on the side of the cup's ball, the muzzle chamfer is not correct, and the cup has no markings on it. That was the bad; the good is: overall length is correct, tube outside diameter is correct, cup outside dimensions are largely correct, it is made of all steel, and it can be used with any standard M2 baseplate and M2/M5 bipod mount. We have a few of these available and when they are gone, they are gone. We will not be making anything less expensive than our standard reproduction that can be seen in the last photo of this auction (and can be purchased in a separate auction here on gunbroker), so if you are on a budget, and need a decent dummy 60mm tube/cup, this is the thing for you! Paint is different on everyone that we have, and is not in very good shape.
Approx length ", Approx width ", Approx height ", Approx weight lbs.
Pictures are stock images of our inventory. Unless otherwise noted, you will not be receiving the exact item shown in the pictures. The pictures are representative of the item's general condition. The item you receive might be slightly better, or worse, condition than was shown in the pictures.
Please visit our page about order lead times here: Order Lead Times
